No products
* CAT II and CAT III
* contact parts Ni-plated
* insulation: PA 6.6 (Polyamid)
* terminal: pluggable
* rated current: 32A
* rated voltage: 1000V
* operating temperature range: -10°C...+70°C
* by Schützinger
KIT240...
* CAT II and CAT III
* contact parts Ni-plated
* insulation: PA 6.6 (Polyamid)
* terminal: pluggable
* rated current: 32A
* rated voltage: 1000V
* operating temperature range: -10°C...+70°C
* by Schützinger
KIT2400
CAT II multimeter kit
consisting of:
* two safety measuring leads, one safety test probe with changeable probe insets and one angled safety lamella-basket plug made-up on highly flexible PVC-double-insulated lead 2,5mm², length 1m, colours: 1x red and 1x black
* two safety protection caps to protection for the contact tips, for IC with 2.54mm taster (DIL) to be used with probe inset. Can be used as tool to screw the insets intro the probes, colours: 1x red and 1x black
* two probe insets, both ends can be used individualy, with 5mm spring leaded steel tip and a rigid steel tip Ø 4mm
* two probe insets, this inset provides a Ø 2.4mm lamella-basket plug
* two probe insets, this inset provides a Ø 2mm lamella-basket plug
* two probe insets, this inset provides a rigid, hardened steel tip Ø 4mm
KIT7093
CAT III multimeter kit
* consisting of:
* two safety measuring leads, two safety lamella-basket plugs with axial safety socket Ø 4mm, made-up on highly flexible PVC-double-insilated lead 2.5mm², length 1.5m, colours: 1x black and 1x red
* two safety crocodile clips with safety socket Ø 4mm and grips up to Ø 15mm, colours: 1x black and 1x red
* two safety test probes, with axial safety socket Ø 4mm. The over moulding protection is inclused, colours: 1x black and 1x red
* two safety crocodile clip with safety socket Ø 4mm and grips up to Ø 11.5mm, colours: 1x black and 1x red
KIT6899
CAT II multimeter profi kit
* for highest requirements to measuring instruments and integrated application of quick-release-terminals
consisting of:
* two safety pincer clips, safety socket Ø 4mm, with flexible shaft and spring wire grabber (stainless steel) for a good contact to pins and wires in inacceptable places, colours: 1x black and 1x red
* two safety quick-release terminal to plug in Ø 4mm safety sockets, colours: 1x black and 1x red
* two safety measuring leads with two safety lamella-baskets made-up on highly flexible PVC-double-insulated leed 2.5mm², length 1m, colours: 1x black and 1x red
* two safety crocodile clips with safety socket Ø 4mm and grips up to Ø 15mm, colours: 1x black and 1x red
* two safety test probe sets with axial safety socket Ø 4mm and changeable probe insets, colours: 1x black and 1x red
* each two pieces of four different, exchangeable test probes inserts (as KIT2400)
Product | Stock | Unit price | Volume discounts |